Language
EZ-WIRE Polyamide Wire 131' | BioPlus
ITEM#
FILPOLY-2,5CX131
EZ-WIRE is a lift wire for vines or other plants, ideal to attach irrigation tubes on it, or hold bird netting, etc.
Read More
Available online
Clearance
USD$11.07
| Description | Length | Diameter | Gauge | Coil Weight |
|---|---|---|---|---|
| Black Polyamide Wire |
40 m 131' |
2.5 mm 0.0984'' |
12.5 |
0.68 lb 300 gr |
EZ-WIRE Poly Wire is a black high-tensile polyamide (PA6) monofilament with low elongation, compact cross section and high breaking strength. The EZ-WIRE monofilament is ideal for orchards, vineyards, shade covers, netting, and fencing.
Features
- High-tensile polyamide (PA6) monofilament with low elongation
- Breaking elongation: approx. 20% to 24%
- Support long-term temperatures: from - 40º C (-40 ºF) to + 50º C (120 ºF)
- UV and Chemical Resistant
- Lightweight and safe
- Maintenance and corrosion free
- Non conductive, high insulation
- Easy installation, no springs, tensioners or rachets required to maintain tension
- Other applications: support hail protection, greenhouses, horse fencing, etc.
At the time of installation, it is strongly suggested that the tensioning of the polyamide yarn does not exceed 3% of the total length of the row.
INSTALLATION
The EZ-WIRE Polyamide wire can be attached to the first anchor post by a Gripple tensioner. The line should then be rolled out towards the opposite end of the vineyard row. Attach a ire puller to the line, stretch 3% of row length, secure and tie to end post, then release wire puller from line. The polyamide wire will now be properly tensioned. EZ-Wire Polyamide wire can be fastened to intermediate posts with staples or other means incorporating plastic grommets. No additional equipment is required.
Write Your Own Review