Skip to the beginning of the images gallery

Galavanized Steel Helical Anchor

ITEM#

FANCR38-config

The high quality galvanized steel helix anchor is used with vertical axis trellising systems at the start and end of rows. The anchor is designed to be screwed into soft, rockless ground. These helix anchors cannot be used on sandy soil or similar types of ground.

Recommendations according to the sizes :

16" x 1/2" stem, 3" helix - recommended for trellising systems, e.g. raspberries.
38" x 5/8" stem, 4" helix - recommended for trellising systems, e.g. vines.
46" x 3/4" stem, 6" helix - recommended for trellising systems, e.g. orchards.
58" x 3/4" stem, 6" helix - recommended for trellising systems, e.g. hop.

*To be used on soft ground without stone

Rating:

87 % of 100

3 Reviews Add Your Review

Available online

Clearance

As low as CAD$6.10

Dimensions & Specifications

Product No.	Anchor	Rod	Helix	Color
FANCR16 Choose this option	16''	1/2''	3''	Galvanized	Choose this option
FANCR38 Choose this option	38''	5/8''	4''	Galvanized	Choose this option
FANCR46 Choose this option	46''	3/4''	6''	Galvanized	Choose this option
FANCR58 Choose this option	58''	5/8''	6''	Galvanized	Choose this option

Tips

Manual installation

Once the anchor is screwed into the ground, it must be fastened in two spots on the end-of-line post with a steel wire to get a V angle. With the Gripple anchor starter set, you pass the wire through the anchor's loop, thus having the second fastening point for adjusting the trellising system's tension. If screwing the anchor into the ground is too hard, dig a hole about half the length of the anchor, and then screw the anchor into the ground with a rod.