Helix Earth Anchor

In stock
ITEM#
FANCR38-config

The high quality galvanized steel helix anchor is used with vertical axis trellising systems at the start and end of rows. The anchor is designed to be screwed into soft, rockless ground. These helix anchors cannot be used on sandy soil or similar types of ground.

Recommendations according to the sizes :

  • 16" x 1/2" stem, 3" helix - recommended for trellising systems, e.g. raspberries.
  • 38" x 5/8" stem, 4" helix - recommended for trellising systems, e.g. vines.
  • 46" x 3/4" stem, 6" helix - recommended for trellising systems, e.g. orchards.
  • 58" x 3/4" stem, 6" helix - recommended for trellising systems, e.g. hop.

*To be used on soft ground without stone

Read More
Rating:
80% of 100
As low as CAD$22.00
Product No. Anchor Rod Helix Color
FANCR16 16'' 1/2'' 3'' Galvanized Galvanized
FANCR38 38'' 5/8'' 4'' Galvanized
FANCR46 46'' 3/4'' 6'' Galvanized
FANCR58 58'' 5/8'' 6'' Galvanized

Manual installation

Once the anchor is screwed into the ground, it must be fastened in two spots on the end-of-line post with a steel wire to get a V angle. With the Gripple anchor starter set, you pass the wire through the anchor's loop, thus having the second fastening point for adjusting the trellising system's tension. If screwing the anchor into the ground is too hard, dig a hole about half the length of the anchor, and then screw the anchor into the ground with a rod.

 

Installation with auger

Can be installed with an auger equipped with an adapter to fasten the anchor to the auger. 

 

 




Write Your Own Review
You're reviewing:Helix Earth Anchor
Your Rating

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You will now be redirected to another store view according to your geo-location.

You will now be redirected to another store view according to your geo-location.