EZ-WIRE Polyamide Wire

In stock
ITEM#
FILPOLY-2,2SBL-config

EZ-WIRE is a lift wire for vines or other plants, ideal to attach irrigation tubes on it, or hold bird netting, etc.

Read More
Rating:
100% of 100
As low as CAD$230.00
Product No. Description Length Diameter Gauge Coil Weight
FILPOLY-2,5S Black Polyamide Wire 1 945 m
6 383'
2,5 mm
0,0984''
12,5 24 lb
10,89 kg
FILPOLY-2,5CX131 Black Polyamide Wire 40 m
131'
2,5 mm
0,0984''
12,5 0,68 lb
300 gr
FILPOLY-3C Black Polyamide Wire 1 351 m
4 432'
3 mm
0,1181''
11 24 lb
10,89 kg
FILPOLY-4C Black Polyamide Wire 760 m
2493'
4 mm
0,1575''
8 11,2 kg
24,7 lb
FILPOLY-4CX45 Black Polyamide Wire
BioPlus
14 m
45'
4 mm
0,1575''
8 TBD

EZ-WIRE Poly Wire is a black high-tensile polyamide (PA6) monofilament with low elongation, compact cross section and high breaking strength.  The EZ-WIRE monofilament is ideal for orchards, vineyards, shade covers, netting, and fencing.  

Features

  • High-tensile polyamide (PA6) monofilament with low elongation
  • Breaking elongation: approx. 20% to 24%
  • Support long-term temperatures:  from - 40º C (-40 ºF) to + 50º C (120 ºF) 
  • UV and Chemical Resistant
  • Lightweight and safe
  • Maintenance and corrosion free
  • Non conductive, high insulation
  • Easy installation, no springs, tensioners or rachets required to maintain tension
  • Other applications: support hail protection, greenhouses, horse fencing, etc.


At the time of installation, it is strongly suggested that the tensioning of the polyamide yarn does not exceed 3% of the total length of the row.


For example, if the row is 100 m (330 pi) long, the power up should not exceed 30 m (10 pi)

Use

  • FILPOLY-2,2SBL, FILPOLY-2,2CL - Ideal to hold strawberry plants on each side (off ground production in greenhouse)
  • FILPOLY-2,5S, FILPOLY-3S - Lift wire for vines or other plants, ideal to attach on it irrigation tubes, etc.
  • FILPOLY-4S - Bearing wire for vines and bird net on structure (instead of steel wire)
  • FILPOLY-4SBL - White polyamide wire for horse fence

      INSTALLATION


      The EZ-WIRE Polyamide wire can be attached to the first anchor post by a Gripple tensioner.  The line should then be rolled out towards the opposite end of the vineyard row.  Attach a ire puller to the line, stretch 3% of row length, secure and tie to end post, then release wire puller from line. The polyamide wire will now be properly tensioned. EZ-Wire Polyamide wire can be fastened to intermediate posts with staples or other means incorporating plastic grommets. No additional equipment is required.

      Write Your Own Review
      You're reviewing:EZ-WIRE Polyamide Wire
      Your Rating

      This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.