Galavanized Steel Helical Anchor

ITEM#
FANCR38-config

The high quality galvanized steel helix anchor is used with vertical axis trellising systems at the start and end of rows. The anchor is designed to be screwed into soft, rockless ground. These helix anchors cannot be used on sandy soil or similar types of ground.

Recommendations according to the sizes :

  • 16" x 1/2" stem, 3" helix - recommended for trellising systems, e.g. raspberries.
  • 38" x 5/8" stem, 4" helix - recommended for trellising systems, e.g. vines.
  • 46" x 3/4" stem, 6" helix - recommended for trellising systems, e.g. orchards.
  • 58" x 3/4" stem, 6" helix - recommended for trellising systems, e.g. hop.

*To be used on soft ground without stone

Read More
Rating:
87 % of 100
Available online
Clearance
As low as CAD$6.10
Product No. Anchor Rod Helix Color
FANCR16 Choose this option 16'' 1/2'' 3'' Galvanized Choose this option
FANCR38 Choose this option 38'' 5/8'' 4'' Galvanized Choose this option
FANCR46 Choose this option 46'' 3/4'' 6'' Galvanized Choose this option
FANCR58 Choose this option 58'' 5/8'' 6'' Galvanized Choose this option

Manual installation

Once the anchor is screwed into the ground, it must be fastened in two spots on the end-of-line post with a steel wire to get a V angle. With the Gripple anchor starter set, you pass the wire through the anchor's loop, thus having the second fastening point for adjusting the trellising system's tension. If screwing the anchor into the ground is too hard, dig a hole about half the length of the anchor, and then screw the anchor into the ground with a rod.

 

Installation with auger

Can be installed with an auger equipped with an adapter to fasten the anchor to the auger. 

 

 




Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

You will now be redirected to another store view according to your geo-location.