Anchor with helix for trellising

Available online

The black anchor designed for all types of low-rock soils allows manual drilling of the soil. The anchor with a high-quality galvanized steel helix is used in vertical trellising systems at the beginning and end of the row. The anchor is made to be screwed into soft soil without rocks. These helical anchors can be installed in sandy or more difficult soil.

Read More
As low as CAD$13.40
Product No. Anchor Rod Helix Color
FANCR16BLACK 16'' 5/8'' 4'' Black (paint)
FANCR38BLACK 38'' 5/8'' 4'' Black (paint)
FANCR46BLACK 46'' 3/4'' 6'' Black (paint)
FANCR58BLACK 58'' 3/4'' 6'' Black (paint)

Once the anchor is securely screwed to the ground, simply let out only the hook to connect the cable to the outgoing eyelet. For a complete installation, consult the "TIPS" tab of the product. The helix anchor is available in several sizes to provide stronger tension for vineyards, orchards, or hops.


Note on helix earth anchor sizes:

38" x 5/8" stem, 4" helix - recommended for trellising systems, e.g. vines.

46" x 3/4" stem, 6" helix - recommended for trellising systems, e.g. orchards.

58" x 3/4" stem, 6" helix - recommended for trellising systems, e.g. hop. *Available by special order only*



Manual installation

Once the anchor is screwed into the ground, it must be fastened in two spots on the end-of-line post with a steel wire to get a V angle. With the Gripple anchor starter set, you pass the wire through the anchor's loop, thus having the second fastening point for adjusting the trellising system's tension. If screwing the anchor into the ground is too hard, dig a hole about half the length of the anchor, and then screw the anchor into the ground with a rod.


Installation with auger

Can be installed with an auger equipped with an adapter to fasten the anchor to the auger. 



Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

You will now be redirected to another store view according to your geo-location.