TeeJet Unique Nozzle Body for Rigid Pipes

In stock
ITEM#
IS TJQJ17560A3/4NYB-config
As low as CAD$5.24
Product No. To Clamp On
IS TJQJ17560A3/4NYB 3/4'' pipe
(26,3–27,4 mm)
IS TJQJ17560A1NYB 1'' pipe
(33–34,1 mm)

The unique nozzle body for rigid pipes is used to create a customized, versatile spraying system. It is used for all spraying types: herbicides, fungicides, insecticides, etc., and it links the water supply pipe to the nozzle of your choice. It is installed on a ¾” or 1” aluminium, PVC or polyethylene pipe. The body is equipped with an anti-drip system and its maximum spray pressure is 300 psi (20 bar).

Use 

  • Pre-drill 9.5 mm (3/8”) holes in the water supply pipe at the desired locations.
  • Open the bracket by removing the screw, position it on the pipe and close it firmly.
  • Insert the nozzle and gasket inside the nut with a ¼ turn. If required, a filter can also be added (see the tips tab).
  • Install the nut with a ¼ turn on the nozzle body.


Features

  • For installation on ¾” or 1” pipes.
  • Equipped with a ChemSaver® anti-drip system. A 10 psi (0.7 bar) pressure is required to operate the nozzle.
  • The standard membrane is made of EPDM with optional Viton.
  • Installation on a 9.5 mm hole drilled in the pipe with maximum spray pressure of 300 psi (20 bar).
  • The upper part of the bracket has a permanent hole for attachment on a flat surface.

Write Your Own Review
You're reviewing:TeeJet Unique Nozzle Body for Rigid Pipes
Your Rating

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You will now be redirected to another store view according to your geo-location.

You will now be redirected to another store view according to your geo-location.