Language
EZ-WIRE Polyamide Lift Wire 131'
ITEM#
FILPOLY-2,5CX131
EZ-WIRE is a lift wire for vine staking, ideal to attach irrigation tubes on it, or hold bird netting, etc.
Read More
Available online
Clearance
CAD$13.95
| Description | Length | Diameter | Gauge | Coil Weight |
|---|---|---|---|---|
| Black Polyamide Wire |
40 m 131' |
2.5 mm 0.0984'' |
12.5 |
0.68 lb 300 gr |
EZ-WIRE Poly Wire is a black high-tensile polyamide (PA6) monofilament with low elongation, compact cross section and high breaking strength.
Features
- High-tensile polyamide (PA6) monofilament with low elongation
- Breaking elongation: approx. 20% to 24%
- Support long-term temperatures: from - 40 °C (-40 °F) to + 50 °C (120 °F)
- UV and Chemical Resistant
- Lightweight and safe
- Maintenance and corrosion free
- Non conductive, high insulation
- Easy installation, no springs, tensioners or rachets required to maintain tension
At the time of installation, it is strongly suggested that the tensioning of the polyamide yarn does not exceed 3% of the total length of the row.
INSTALLATION
The EZ-WIRE Polyamide wire can be attached to the first anchor post by a Gripple tensioner. The line should then be rolled out towards the opposite end of the vineyard row. Attach a ire puller to the line, stretch 3% of row length, secure and tie to end post, then release wire puller from line. The polyamide wire will now be properly tensioned. EZ-Wire Polyamide wire can be fastened to intermediate posts with staples or other means incorporating plastic grommets. No additional equipment is required.
Write Your Own Review
You will now be redirected to another store view according to your geo-location.