TeeJet Unique Nozzle Body for Rigid Pipes

The unique nozzle body for rigid pipes is used to create a customized, versatile spraying system. It is used for all spraying types: herbicides, fungicides, insecticides, etc., and it links the water supply pipe to the nozzle of your choice. It is installed on a ¾'' or 1'' aluminium, PVC or polyethylene pipe. The body is equipped with an anti-drip system and its maximum spray pressure is 300 PSI (20 bar).

Use 

• Pre-drill 9.5 mm (3/8'') holes in the water supply pipe at the desired locations.
• Open the bracket by removing the screw, position it on the pipe and close it firmly.
• Insert the nozzle and gasketinside the nut with a ¼ turn. If required, a filter can also be added (see the tips tab).
• Install the nut with a ¼ turn on the nozzle body.

Features

• For installation on ¾'' or 1'' pipes.
• Equipped with a ChemSaver® anti-drip system. A 10 PSI (0.7 bar) pressure is required to operate the nozzle.
• The standard membrane is made of EPDM with optional Viton.
• Installation on a 9.5 mm hole drilled in the pipe with maximum spray pressure of 300 PSI (20 bar).
• The upper part of the bracket has a permanent hole for attachment on a flat surface.