Screen elements for Plastic Filters - AMIAD

The Amiad screen elements are constructed of molded plastic ribs that support a stainless steel weave-wire screen with filtration degrees from 6 to 3500 micron.

Suspended solids accumulate on the inside surface of the screen. The screen can be easily removed from housing to be rinsed manually.

Water flows through the filter element from the inside out, so that suspended solids primarily accumulate on the lower end of the element and can be removed by means of a flush valve. The screen elements are especially suitable for separating inorganic particles and creating very low head loss.

The cylinder incorporates two O-rings to ensure perfect sealing inside the filter housing.