DRAMM Residential Syphonject Injector

In stock
IS DR10-22626

Dramm's Syphonject draws a concentrated solution from a bucket through a flexible suction tube and then dilutes it with the passing water stream at an approximate ration of 20 parts water to 1 part concentrated solution.

The Syphonject comes with the 170PL Water Breaker.

Use on standard 3/4" GHT water hose.

Determine the ratio of your injector

What you will need:

1. A large container you know the Volume of (Example - 5 Gallon Bucket)

2. A Small container you know the volume of (Example - 1 Quart Bottle)

Step 1 : Set up the Syphonject on the Faucet. Connect the hose to it. 

Step 2 : Fill the small container with clear water (example - 1 Quart) and place the small siphon hose into it.

Step 3 : Hold the end of the hose in the large container (example - 5 Gallon Bucket)

Step 4 : Turn on the water and fill the large container until the small container is empty.

Step 5 : Measure the amount in the large container (Example - Remaining amount of 4 Gallons) 

Step 6 : Calculate the ratio. 5 gallons (20 Quarts) to 1 Quart = 20: 1

Write Your Own Review
You're reviewing:DRAMM Residential Syphonject Injector

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.