TeeJet Unique Nozzle Body for Rigid Pipes

ITEM#
IS TJQJ17560A3/4NYB-config

The unique nozzle body for rigid pipes is used to create a customized, versatile spraying system adapting to the needs of the industry.

Read More
Available online
Clearance
As low as USD$5.21
Product No. To Clamp On
IS TJQJ17560A3/4NYB Choose this option 3/4'' pipe
(26.3–27.4 mm)
Choose this option
IS TJQJ17560A1NYB Choose this option 1'' pipe
(33–34.1 mm)
Choose this option

The unique nozzle body for rigid pipes is used to create a customized, versatile spraying system. It is used for all spraying types: herbicides, fungicides, insecticides, etc., and it links the water supply pipe to the nozzle of your choice. It is installed on a ¾'' or 1'' aluminium, PVC or polyethylene pipe. The body is equipped with an anti-drip system and its maximum spray pressure is 300 PSI (20 bar).

Use 

  • Pre-drill 9.5 mm (3/8'') holes in the water supply pipe at the desired locations.
  • Open the bracket by removing the screw, position it on the pipe and close it firmly.
  • Insert the nozzle and gasketinside the nut with a ¼ turn. If required, a filter can also be added (see the tips tab).
  • Install the nut with a ¼ turn on the nozzle body.


Features

  • For installation on ¾'' or 1'' pipes.
  • Equipped with a ChemSaver® anti-drip system. A 10 PSI (0.7 bar) pressure is required to operate the nozzle.
  • The standard membrane is made of EPDM with optional Viton.
  • Installation on a 9.5 mm hole drilled in the pipe with maximum spray pressure of 300 PSI (20 bar).
  • The upper part of the bracket has a permanent hole for attachment on a flat surface.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account