Senninger ½" Xcel-Wobbler Kit

In stock
ITEM#
IKJ XWOB050H

The Senninger ½" Xcel-Wobbler kit is perfectly adapted to garden hoses. Equipped with a 4' polyethylene tube and a galvanized steel rod, it can be installed and moved promptly since it can be attached manually or with a hammer to the ground.

Read More
USD$36.97
Flow rate Pressure Trajectory angles Diameter Spacing
0.78
to
6.97 GPM
10 to 25 PSI
(0.69 to 1.72 bar)
High angle
29°
(black deflector)
At 3' height (0.91 m)
32' to 48'
(9.8 to 14.6 m)

At 6' height (1.83 m)
34' to 54'
(10.3 to 16.5 m)
20’ x 20’
(6.10 m x 6.10 m)


25’ x 25’
(7.62 m x 7.62 m)

The Senninger ½" Xcel-Wobbler Sprinkler - Senninger kit is perfectly adapted to garden hoses. Equipped with a 4' polyethylene tube and a galvanized steel rod, it can be installed and moved promptly since it can be attached manually or with a hammer to the ground.

It can cover up to 1,950 sq. ft. (180 sq. m.), i.e. a 50' (15.25 m) diameter.  

The height of the jet may vary between 2.5 to 5.5 ft (0.8 to 1.7 m) depending on the dimension of the nozzle and the presure. The minimum recomended height for the risers is 1.5 ft (0.46 m).

The kit includes :

  • 1 x Xcel-Wobbler Nozzle #7 - Lime - 7/64" - Senninger
  • 1 x 1/2" Xcel-Wobbler Sprinkler without nozzle
  • 1 x PVC tube 1/2" (13 mm) for Sprinkler Stand 1/2''
  • 1 x 4' Galvanized Steel Rod
  • 1 x ¾" FHT x ¾" FPT swivel brass coupling
  • 1  x Reducer Bushing Mpt X Fpt SCH 40
  • 1 x Female connector for sprinkler stand
  • 1 x Male coupler 3/8'' barb x 1/2
Write Your Own Review
You're reviewing:Senninger ½" Xcel-Wobbler Kit

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.