|FANCR16||16"||1/2"||3"||Grey (no paint)|
Once the anchor is screwed into the ground, it must be fastened in two spots on the end-of-line post with a steel wire to get a "V" angle. With the Gripple anchor starter set, you pass the wire through the anchor's loop, thus having the second fastening point for adjusting the trellising system's tension. If screwing the anchor into the ground is too hard, dig a hole about half the length of the anchor, and then screw the anchor into the ground with a rod.
Can be installed with an auger equipped with an adapter to fasten the anchor to the auger.