Language
1/2" Brass Impact Sprinkler 14VH
ITEM#
IJ 14-VHDC-Config
This sprinkler is used in general irrigation applications, and on permanent and solid set systems, including center pivots. Wearing quality is excellent.
Read More
Available online
As low as
USD$25.27
| Product No. | Trajectory Angle | Operating Range | Flow Rate | Radius | Nozzle included | |
|---|---|---|---|---|---|---|
| IJ 14-VHDC Choose this option | 23° |
20 to 60 PSI 1.4 to 4.1 bars |
0.56 to 2.68 gpm 0.14 to 0.61 m3/h |
29 to 38 ft 9.0 to 11.70 m |
No nozzle A nozzle is needed for it to work |
Choose this option |
| IKJ 14VH-3/32 Choose this option | 23° |
20 to 60 PSI 1.4 to 4.1 bars |
1.14 to 1.97 gpm 0.26 to 0.45 m3/h |
33 to 37 ft 10.10 to 11.30 m |
3/32 | Choose this option |
| IKJ 14VH-5/64 Choose this option | 23° |
20 to 60 PSI 1.4 to 4.1 bars |
0.79 to 1.37 gpm 0.18 to 0.31 m3/h |
30 to 34 ft 9.3 to 10.50 m |
5/64 | Choose this option |
| IKJ 14VH-7/64 Choose this option | 23° |
20 to 60 PSI 1.4 to 4.1 bars |
1.55 to 2.68 gpm 0.35 to 0.61 m3/h |
34 to 38 ft 10.4 to 11.70 m |
7/64 | Choose this option |
This sprinkler is used in general irrigation applications, and on permanent and solid set systems, including center pivots. Wearing quality is excellent. Plastic non-clog vane in nozzle ensures excellent performance in wind.
Primary Applications
1/2" (13 mm) Full Circle, Brass, 23° Trajectory Impact Sprinkler
Features & Benefits
- Patented, self-flushing wedge drive
- Durable brass die-cast arm
- Stainless steel springs and fulcrum pin
- Chemically resistant washers
- Two-year warranty
- Wedge drive runs on smaller nozzles and lower pressures
- >Self-flushing design reduces wear from grit
- Corrosion and grit resistant
- Built to last
Specifications
- Bearing: 1/2" Male NPT, Brass
- Trajectory Angle: 23 degrees
- Operating Range: 20-60 PSI (1.4-4.1 bar)
- Flow Rate: .56-2.68 (0.14-0.61 m 3 /h)
- Radius: 29-39 ft.(8.85-11.90 m)
Nozzle chart
Nozzle chartWrite Your Own Review